Why should schools install anti-collision lifting columns when there is a craze for them on campus?

With the continuous development of society, the usage of motor vehicles has been increasing. The increase of motor vehicles is one of the safety issues on campus, whether it is around or within the campus. The safety management of the campus should start from the campus gate and perimeter, and effective management of the entry and control of external vehicles is the focus of campus safety management.

Throughout the past terrorist attacks, motor vehicles have undoubtedly been an indispensable carrier for various types of terrorist attacks, and road barrier anti-collision equipment has become the first safety barrier on the anti-terrorism road. Especially in schools where teenagers and children are concentrated, safety issues require absolute attention.

 

Campus is a key protected area in anti-terrorism actions, and students are the future of the country. Ensuring a good security atmosphere for them has always been a priority for relevant departments to promote. Since 2015, the Ministry of Education and the Ministry of Work Safety have jointly issued opinions on strengthening the construction of safety risk prevention and control systems for primary and secondary schools and kindergartens, which require the installation of anti-terrorism and riot prevention equipment such as anti-collision lifting columns on campuses through policy documents.

 

"According to the actual situation of the school gate and surrounding 50 meter area, parents' waiting areas should be set up according to local conditions, and hard anti-collision facilities such as isolation barriers, isolation piers, speed bumps, or anti-collision lifting columns should be set up to ensure the safety and orderly entry and exit of teachers and students."

 

"Under the premise of controllable risks, schools should actively organize physical exercise, outdoor activities, etc. to cultivate students' strong physique. During students' time on campus, closed management should be implemented on the campus, and hard anti-collision facilities should be set up at the school entrance according to conditions to prevent illegal entry of personnel, vehicles, etc."

 

"Boarding campuses should be equipped with full-time security guards and dormitory management personnel in accordance with regulations to ensure 24-hour duty. Resources should be further integrated, and security systems and management platforms such as video surveillance and rapid alarm networking should be improved. Within this year, the compliance rate for urban primary and secondary schools and kindergartens should reach 100%. Work safety agencies should work with education departments to set up hard anti-collision facilities such as isolation barriers and anti-collision lifting columns at school entrances based on the actual situation of campus and surrounding security and traffic environment. Efforts should be made to gradually improve physical defense facilities in rural and rural campuses. Safety management systems such as gatekeepers, patrols, and hazard identification should be improved, and safety management responsibilities should be strictly implemented to prevent unrelated personnel, controlled props, flammable and explosive materials from entering the campus."

 

There are countless notices and requirements from the central department regarding campus safety, which have been issued and forwarded to the education and industrial safety departments of various provinces and cities below. Each province and city's department is strengthening the construction of security and prevention facilities and enhancing the security and prevention capabilities of school gates and surrounding areas through a "four in one" school security and prevention network.

 

The installation of an intelligent anti-collision lifting column obstacle control system can improve the level of safety prevention management. For various entrances and exits that need to be controlled, control and management are implemented according to different objects and their access levels. Each school is equipped with security monitoring rooms, video image acquisition devices are installed in important parts such as the entrance. One click emergency alarm devices are installed in the guard duty room and connected to the local alarm center. Parents waiting areas are set up according to local conditions, and hard anti-collision facilities such as isolation barriers, isolation piers, speed bumps or anti-collision lifting columns are set up. Necessary traffic facilities such as warning and prompt signs, pedestrian crossings, signal lights, speed bumps, etc. are added around the road and school.

 

In emergency situations, it can be controlled through linkage with the security department, with alarm function and real-time linkage with the video system. While ensuring normal vehicle traffic, it can also prevent abnormal vehicles from entering the school through forced collisions. Ensure the personal safety of students, campus property safety, and improve the level of campus security prevention.