Enhanced Security
Tyre killers provide a physical barrier that effectively prevents unauthorized vehicles from gaining access, ensuring the safety of sensitive areas. The instant disabling of vehicles reduces the risk of breaches and potential threats.
Deterrence
The presence of a tyre killer acts as a strong deterrent to unauthorized access attempts. The visible spikes or blades serve as a warning to drivers, discouraging any attempts to bypass security protocols.
Versatility
Tyre killers can be used in various settings, from high-security military bases to commercial properties. Their adaptability and ease of integration with existing security systems make them a versatile solution for a wide range of applications.
Durability
Constructed from high-strength steel, tyre killers are designed to withstand the impact of heavy vehicles and harsh weather conditions. Their durability ensures long-term reliability and minimal maintenance requirements.
Tyre killer is designed after broad exploration and testing and is great for laying out at the entrance of buildings that require tight security against vehicle assaults. It prevents the entrance and exit of unapproved vehicles from the premises. It tends to be integrated with road safety systems like a boom barrier to accomplishing an entrance control check-point at the most significant level of safety.
Tyre killer spikes are worked by a hydraulic-driven chamber with heavy speed. The spikes are raised either consequently or physically with an access remote control. The raising time of spikes takes approximately 2 seconds. In case of any power failure, operate the tyre killer in manual mode. These spikes securely fit inside a lockable steel compartment.
The power driving device is integrated with a motor and a trigger device, which are installed in the electric control box toward one side. If any unauthorized vehicle tries to barge in the driveway entrance, security personnel can press the remote control access to activate the tyre killer. While being used, the machine drives the shaft to pivot to raise the spike of tyre killer around 45 degrees starting from the ground to stop the unauthorized vehicles into the premises.
Manual Tyre Killers:
These require human intervention to operate. They are generally used in locations with lower traffic volumes or where automatic systems are not feasible.
Automatic Tyre Killers:
These are integrated with electronic systems and can be controlled remotely. They are suitable for high-traffic areas and can be linked with other security systems like access control and surveillance.
Surface Mounted Tyre Killers:
Installed directly on the road surface, these are easier to install but may require more maintenance.
In-Ground Tyre Killers:
Embedded into the ground, these are more discreet and offer higher durability and lower maintenance.
Consider a scenario where a thief with a truck breaks into a car parked in a parking lot. Now, the thief needs the parking receipt, which one needs to show to the exit booth employee to leave the premises. In such a situation, the thief will try to smash the boom barrier and, if successful, can go to the property with the stolen car. However, suppose the parking lot owner has a hydraulic tyre killer installed after the exit point.
In that case, the employee can simply press the button when the thief crosses the exit point, immediately raising the spike barriers. This will either force the thief to stop the car before reaching the tyre killer or cause the car's tires to be punctured if the thief doesn't stop, effectively preventing the theft of the vehicle. You need hydraulic tyre killers in front of your building in such situations.
· Tyre killers are best for no or most minor maintenance. Certain things must be considered for the long-term use of busters.
· A mechanism must be cleaned regularly to work in good condition for the long term.
· Spikes must be checked frequently for unrestricted movement.
· There must be no pebble, shopper, or other obstruction in the mechanism, as dust and dirt can condense the life of the mechanism life.
· The equipment needs to be checked regularly to examine the software and hardware.
· Equipment that blocks the work and sees whether the indications of various devices are correct or not.
· Spikes must be lubricated commonly to prevent parts and equipment from rusting.
Bump is a speed self-control device applied vertical deflection to the vehicle passing the bump. Bumps normally are installed in local or private roads, thus sizes of bumps may vary. Bumps may have height 7-15cm with width 30cm or more. Some vehicle drivers feel unhappy due to the immediate and specific hazard of the bumps.
The commercialized vulcanized rubbers bumps have varied width 27.5–50cm with height 4.5–7cm, with color black and white. These synthetic rubber bumps are quite hard and more difficult to get through. These bumps are installed in private areas such as hotels, schools, and shopping malls.
Composition of Tyre Killer
Tyre killer system consists of a main frame, electric transmission station and electric control box.
· Main frame: Mainly include A3 steel, steel blade, base and drive shaft. The whole body is steel structure , adopts GB A3 carbon steel plate and channel steel welding with high-strength load-bearing capacity and anti-collision capacity; Inside body without electrical appliances and line settings , which is waterproof and safe. The device is mounted on the driveway or designated location to limit vehicle traffic.
· The electric transmission station: Mainly include motor, gear box, limit switch, optical axis,bearings, base and a full transmission components.Inner structure no gear, no rotating belt, no maintenance,more stable and longer lift. It's the power source of the tyre killer system, mounted on the side of the main frame. When outage, can drop down or lift up the steel blade manually.
· Electric control part: Mainly include control board, transformer, relays, long distance remote control device and wire control device.
Road Blockers and Tyre Killers are heavy duty and anti-terrorist hostile vehicle mitigation (HVM) barriers that are installed at high-sensitive areas where unauthorized vehicle have strict restrictions for access. They are installed with an intention to block the roadways for vehicle passage and to obstruct the vehicle based attacks. The road blockers are mounted by excavating the ground surface and installing a shallow foundation. Some road blockers can be surface mounted. They can be lowered to clear the ground surface for vehicle movement and raised at an inclination to act as a barrier.
The barriers have manual as well as automatic hydraulic raising and lowering operation. The road blockers can be crash rated and certified according to its capability of stopping and destroying the vehicles after the attack. These are installed at high security locations including military areas, embassies, government offices, etc. Other method used for hostile vehicle mitigation (HVM) barriers consists of spike strips or tire killers. These “tyre killers” allow vehicles to get out of certain areas while preventing vehicles from entering without being altered.
Our Factory
Xiamen Jietian Technology Co.,Ltd established in 2006,is a professional manufacturer engaged in the research,development sale and service of Bollard,Road Blocker,Tire Killer,License Plate Recognition System,Barrier Gate,Car Charging Pile etc and other anti-explosion one-stop facility solutions provider.
Xiamen Jietian Technology Co.,Ltd with years of product research and development, continuous innovation and product sales network throughout the country, serving more than 100,000 customers, exported to Italy, Britain, Germany Countries, Japan and other parts of the world.
We're professional tyre killer manufacturers and suppliers in China, specialized in providing high quality customized service. We warmly welcome you to wholesale high-grade tyre killer made in China here from our factory.
wedge barrier, vehicle tyre killer, removable car park bollards(0/10)
