What are the characteristics of hydraulic roadblock machine?

Hydraulic roadblocks prevent unauthorized vehicles from forcibly breaking in, and are highly practical, reliable, and safe. What other features does a hydraulic roadblock have? Let's take a look.

What are the characteristics of hydraulic roadblocks?

①Safety and reliability

When encountering emergency situations such as power outages, the column can be manually lowered to open the channel and release vehicles, and the operation is stable and reliable.

②Economical and affordable

Environmentally friendly and energy-saving, low consumption, lower failure rate, longer service life, and reduced maintenance costs. In addition, the non-traditional mechanism design is adopted, and installation and maintenance are simpler and faster.

③Unique structure

The core part of the hydraulic unit and the mechanical power mechanism design can effectively transfer mechanical energy to the hydraulic drive unit, and the action is efficient. The unique design of the hydraulic unit to achieve pressure rise has excellent performance and is rare in the same field at home and abroad.

④Fast and calm

The lifting time can reach 3 seconds, which is much longer than the pneumatic lifting roadblock of the same specification, which is extremely valuable. Because it uses a hydraulic drive unit, it moves softly and calmly, which solves the problem of high noise of the traditional pneumatic lifting roadblock due to the working noise of the air pump.

⑤Agile control

The control unit adopts a multi-functional logic controller, which can modulate a variety of different functional modes to meet the different functional needs of different users. In addition, it is worth mentioning that its movement stroke is an adjustable timing design, and users can freely control the lifting height of the column, effectively saving energy consumption.
 

Installation and use of hydraulic roadblock machine

Find the center point of the location where the lifting roadblock needs to be installed and dig a pit equal to the product size. Cover the bottom with about 10cm of sand and stone, then put the lifting roadblock in to make it level with the ground. Pre-buried diameter 6 branch pipes are connected to the controller, and then cement is poured around the roadblock until it is level with the ground. The controller is connected to a 220V power supply.

How to use the hydraulic roadblock machine:

Press the remote control up and down buttons to operate, and the remote control distance is 50-80 meters (straight line distance). After the equipment is powered off, the pillars can also be remotely lowered to the ground to play a consumption role.